AAA-055-00188
Jaylor Owner Manual
-4-
5000 Series Truck Mount Models
1.
INTRODUCTION
Congratulations on your choice of a Jaylor mixer to complement your operation. At Jaylor we want our
customers to have access to leading nutritionists and information. You can visit the Nutrition Section of
our website for articles, advice and upcoming events, or just browse our Social Media sites to see what
other farmers are saying.
www.facebook.com/jaylor
OR
www.twitter.com/myjaylor
Our team of nutritionists are also available by phone to answer any questions or concerns you might
have.
Safe, efficient and trouble-free operation of your mixer requires that you and anyone else who will be
operating or maintaining the machine, reads and understands the safety, operating, maintenance and
troubleshooting information contained within this manual.
This manual covers the 5000 Series Truck Mount models manufactured by Jaylor. Keep this manual readily
available for reference and be sure to pass it on to new operators or owners. Contact your nearest Jaylor
dealer or distributor if you need assistance or information.
This equipment has been designed and manufactured for efficient cutting, mixing and feeding of
ingredients destined exclusively for animal consumption.
OPERATOR ORIENTATION
- The directions left, right, front, and rear, as mentioned throughout the
manual, are as seen from the driver’s seat and facing forward.
2.
POLICY STATEMENT
It is the policy of Jaylor to improve its products where it is possible and practical to do so. Jaylor reserves
the right to make changes or improvements in design and construction at any time, without incurring the
obligation to make these changes on previously manufactured units.
3.
OWNER/OPERATOR’S RES
PONSIBILITY
It is the Owner/Operator’s responsibility to read the
Owner Manual
, to operate, lubricate, maintain, and
store the product in accordance with all instructions and safety procedures. Failure of the Owner/Operator
to read the
Owner Manual
is a misuse of this equipment.
Like all mechanical products, Jaylor products will require cleaning and upkeep. It is the Owner/Operator’s
responsibility to inspect the product and to have any part(s) and/or assemblies repaired or replaced when
continued operation would cause damage or excessive wear to other components or cause a safety hazard.
It is the Owner/Operator’s responsibility to deliver the product to the authorized Jaylor Dealer or Distributor,
from whom it was purchased, for service or replacement of defective parts which are covered by warranty
(see section 4 for full warranty information)
. Repairs to be submitted for warranty consideration must
be made within
thirty (30) days
of the failure. It is the O
wner/Operator’s responsibility to cover any cost
incurred by the Dealer for traveling to the site or transporting the product for the purpose of performing a
warranty obligation or inspection.
