AAA-055-00187
61
5000 SERIES HD TRAILER OWNER MANUAL
Periodic Maintenance Chart
A list of common maintenance items and their intervals is supplied below. Remember, these
maintenance items and intervals are general. Depending on the application, additional maintenance items
may be necessary and/or intervals may be shortened. It is the responsibility of the operator to properly
maintain the equipment based on the specific application.
(Note: See maintenance sections preceding this chart for specific procedures)
Item
Interval
Check reservoir oil level
Every 1 day
Check 2-speed gearbox oil level
Every 1 day
Check conveyor chain tension
Every 1 day
Check tire pressure
Every 1 day
Grease PTO crosses & U-joints
Every 8 hours or 25 loads
Grease auger bushings
Every 8 hours or 25 loads
Grease PTO shafts
Every 16 hours or 50 loads
Grease conveyor bearings
Every 16 hours or 50 loads
Grease driveshaft bearing
Every 16 hours or 50 loads
Grease axle weigh bars
Every 16 hours or 50 loads
Check hydraulic fittings and hoses for leaks
Every 1 week
Grease conveyor chain coupler
Every 1 week
Inspect conveyor chain condition
Every 1 week
Inspect auger knife condition
Every 1 week
Check hardware for tightness
Every 1 month
Check tire condition
Every 1 month
Check / clean gearbox magnetic plug
After first 25 hours
Every 100 hours or 6 months
Clean oil reservoir breather
Every 200 hours or 6 months
Grease wheel hubs
Every 6 months
Change gearbox oil
After first 100 hours
Every 2000 hours or 1 year
