Periodic Maintenance
WARNING: Do not perform maintenance of the loader or of the tractor while
loader is raised. Do not use any kind of safety bar to support raised loader.
If loader interferes with tractor maintenance, remove loader from tractor.
CAUTION:
During
any
loader
maintenance, stop engine, lower loader to ground
and release hydraulic pressure by moving joystick repeatedly in all directions.
NOTICE: Maintain safety decals in good condition. Replacement decals are
available under part number 945355
Daily:
1.
Make sure all parts of bucket quick attach system are clean.
Only clean components will function safely.
2.
Check tire inflation pressure. Refer to tractor Operator’s Manual for recommended tire pressures.
3.
Inspect loader hoses for damage. Replace any hose with even the slightest damage.
Every 10 Hours of Operation:
Lubricate per diagram
1.
Bushings
2.
Bushings
3.
Bushings
4.
Bucket latching mechanism
5.
Loader latching mechanism
If using the bale lift, check the
tightness of all three spear nuts.
Every 50 Hours of Operation:
Check tightness of bolts attaching
Loader frame to tractor.
Note: If loader is not used for longer periods of time (a few days), lower the loader fall the way down and roll
the bucket back so cylinder piston rods are protected from damage.
T50SS/T50HLSS
10
