Javo Plus, Руководство пользователя

Страница: 5 / 26

User Manual Javo Plus en Plus Extra Potmachine
Version 2015-1 4
1 Technical specifications and tolerances
This machine is intended to be used for filling pots automatically with substrate only. The filled pots are then
provided with a drill hole, in which a plant can be placed at the exit conveyor. This machine is meant for processing
pots, substrate and other materials that are described in this manual only. Detailed operation of the machine is
described in section "Operation".
This machine may be used only within the limits for specifications and tolerances of the order, on the
assembly drawing and indicated in this manual. If the machine is used outside these specifications, Javo BV
cannot take responsibility for this machine.
This machine is intended for products as agreed in the order confirmation only. To ensure the proper
operation of this machine, only products with specifications and tolerances as specified in the order may be
used.
Do not use the machine for purposes other than the intended purpose of Javo BV. This can lead to damage
and danger to the operator and its environment
.
This machine is CE marked. When placing multiple machines in one line, the entire line must be properly CE
marked before using this machine. Untill proper CE Marking of the line is carried out, commissioning of this
machine is prohibited.
Specifications
Voltage 400Volt 50Hz 3~+N+ PE / 220Volt 60Hz
Machine connection 16A 5pole
Power consumption 3 kW
Switched socket 1x 16A 5 pole
Weight Plus: ±1200 kg, Plus Extra: ±2000 kg
Height conveyor Plus: 820 mm, Plus Extra: 790 mm
Max. speed Plus: 3840 pots/hour (60Hz), Plus Extra: 1500/63 15/45 ±475 pots/hour
(60Hz)
Min. speed Plus: 780 pots/hour (13 Hz), Plus Extra: 1500/63 15/45 ±250 pots/hour (13Hz)
Minimum pot diameter Plus: 9 cm, Plus Extra: ±19cm
Maximum pot diameter Plus: 23 cm, Plus Extra: ±38cm* (dependent on pot type)
Number of potholders Plus: 16, Plus Extra: 14
Content substrate bin 1100 Litre (1,1 m³)
1000 revolutions drill motor (motor
axis 24mm)
Plus Extra
Drillbush (motor shaft size 19 mm) Plus: Drill shaft 14 mm (up to drill 15 cm)
Operation Loose controls with stop/start/e-stop/reset.
Inverter elevator Standard (controlled on electrical cabinet)
Inverter pottrack Standard (controlled on electrical cabinet)
Year of construction See type plate
Type product As agreed in the order confirmation.
Air (optional) 6 Bar; 250 nL/min.
1.1 Type plate
The type plate is placed onto the main cabinet door.
Website: www.javo.se
E-Mail: info@tradgardsteknik.se