Javo Plus Скачать руководство пользователя

Страница: 25 / 26

User Manual Javo Plus en Plus Extra Potmachine

Version 2015-1

7.9

Drawings and schemes

The drawings accompanying this machine are supplied in a separate file. The wiring diagrams are included in the
electrical cabinet of the machine.

7.10

Spare parts

Only original spare parts and accessories of Javo BV may be used on the machine.

Javo BV advises you to take certain parts in stock because of wear sensitivity and / or any expected downtime for re-

ordering of the parts.

The spare parts list can be found on the assembly drawings. These can be found on JavoNet.

When ordering (spare) parts at Javo BV, the following information must be included: drawing number, item number,

desired length (if applicable) and the desired number of pieces.

7.11

JavoNet

We recommend you to register your machine on JavoNet. This way you get online access to all

technical drawings and documents pertaining to your machine.

Visit our website (www.javo.eu) for more information and to request an account.

7.12

Customer support and advice

Our technical department will answer your other questions about repair and maintenance of your machine and

spare parts. We can help you with any questions regarding the purchase, use and settings of products and

accessories.

Disposal of machine or machine parts

Follow all instructions described in this manual, in particular chapter safety.

Perform the following steps when disposing the machine:

Decommission the machine and remove electric and pneumatic power.

Drain and remove all consumables.

Scrap the machine according to the local legislation.

.se

Содержание Plus



























Результаты поиска

Содержание Plus

Отзывы:

Похожие инструкции для Plus

Бренды по названию

Популярные бренды

Javo Plus, Руководство пользователя

Результаты поиска

Содержание Plus

Отзывы:

Похожие инструкции для Plus

Бренды по названию

Популярные бренды