23
Trouble shooting
THE PROJECTOR DOES NOT TURN ON.
Cause
Remedy
There is no power from the power cable.
Plug the power cord into the AC inlet on the projector,
and plug the power cord into the power outlet. If the
power outlet has a switch, make sure that it is switched
on.
Attempting to turn the projector on again during the
cooling process.
Wait until the cooling down process has completed.
NO PICTURE
Cause
Remedy
The video source is not turned on or connected
correctly.
Turn the video source on and check that the signal
cable is connected correctly.
The projector is not correctly connected to the input
source device.
Check the connection.
The input signal has not been correctly selected.
Select the correct input signal with the
Source
key on
the projector or remote control.
The lens cap is still attached to the lens.
Remove the lens cap.
BLURRED IMAGE
Cause
Remedy
The projection lens is not correctly focused.
Adjust the focus of the lens using the focus adjuster.
The projector and the screen are not aligned properly.
Adjust the projection angle and direction as well as the
height of the unit if necessary.
The lens cap is still attached to the lens.
Remove the lens cap.
REMOTE CONTROL DOES NOT WORK
Cause
Remedy
The battery is out of power.
Replace the battery with a new one.
There is an obstacle between the remote control and the
projector.
Remove the obstacle.
You are too far away from the projector.
Stand within 6 meters (19.5 feet) of the projector.
Содержание JAVES SLC-515SA
Страница 26: ...26 Dimensions Unit mm 240 200 90 ...