Javes JAVES SLC-515SA, Руководство пользователя

Страница: 14 / 27

14
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
In the connections shown below, some cables may not be included with the projector (see "Shipping
on tents" on page 6 ). They are commercially available from electronics stores.
Cable connection
Connecting a computer
The projector provides a VGA socket that allows you to connect it to a notebook or desktop computer.
To connect the projector to a notebook or desktop computer (either through a
VGA cable):
1. Take the supplied VGA cable and connect one end to the D-Sub output socket of the computer.
2. Connect the other end of the VGA cable to the D-SUB/COMP IN signal input socket on the projector.
3. If you wish to make use of the projector (mixed mono) speaker in your presentations, take a suitable audio
cable and connect one end of the cable to the audio output socket of the computer, and the other end to the
AUDIO IN socket of the projector.
A Mac adapter (an optional accessory) is needed if you are connecting legacy version
Macintosh computers.
Many notebooks do not turn on their external video ports when connected to a projector.
Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a
function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press
FN and the labeled function key simultaneously. Refer to your notebook’s documentation to
find your notebook’s key combination.
Connecting Video source devices
This section describes how to connect the projector to Video source devices using video cables. Video cable
connections are recommended for Video presentations.
You can connect your projector to various Video source devices that provide any one of the following output
sockets:
Component Video
S-Video
Video (composite)
You need only connect the projector to a Video source device using just one of the above connecting