Javelin RTR5024 Скачать руководство пользователя

Страница: 12 / 44

CHANGING THE ON-SCREEN DISPLAY

Selecting the On-screen Display

You can select to display or not the date, time, the
number of alarm recordings and tape speed.

Turn the power on to all devices used.

Press the MENU button until the (SET UP 2) menu is
displayed.

@@@@@@@<SET@UP@2>

öDISPLAY

@@@DATE@@@@@@@@@@@Y

@@@TIME@@@@@@@@@@@Y

@@@ALARM@COUNT@@@@Y

@@@SPEED@@@@@@@@@@Y

öBUZZER

@@@ALARM@IN@@@@@@@Y

@@@TAPE@END@@@@@@@Y

@@@KEY@IN@@@@@@@@@N

@@@WARNING@@@@@@@@Y

Press the

button, until the desired item for which

the display function will be set is flashing.

Press the

(or

) button to set “Y” for the functions

described below.

DATE . . . . . . . . . . . . The date is displayed

TIME . . . . . . . . . . . . The time is displayed

ALARM COUNT. . . . The number of alarm

recordings is displayed

SPEED. . . . . . . . . . . The recording/playback

speed mode is displayed

Press the SEARCH button to save the settings.

NOTE:

If the ON SCREEN switch is set to the “ON” position,
the items for which “Y” is set are recorded. The items
for which “N” was set at step

above are not

recorded.

Changing the Date/Time Display Position

Turn the power on to all input devices to the VCR.

Set the ON SCREEN switch to the “ON” position.

The date and time are displayed.

10-15-01@MON@000

15:20:00@@@8

Press the SHIFT

(or

]

) button.

The display will move towards the right (or the
bottom).

NOTES:

If the SHIFT

(or

]

) button is kept pressed for 1

second or more the display will move at a faster speed.

The display position cannot be changed while
recording.

RC4QR/NAJV, NAJV2 (RTR5024, RTR5168 GB) Wed. June, 07/2000

English

Содержание RTR5024













































Результаты поиска

Содержание RTR5024

Отзывы:

Похожие инструкции для RTR5024

Бренды по названию

Популярные бренды

Javelin RTR5024, Инструкция по эксплуатации

Результаты поиска

Содержание RTR5024

Отзывы:

Похожие инструкции для RTR5024

Бренды по названию

Популярные бренды