12
Loading Ribbon Cartridge
The J110i printer requires approved ribbon cartridges (see appendix C). The resin thermal
transfer and dye sublimation ribbons are specifically designed for your J110i Printer.
Note:
i series printers require the use of i series ribbons for full colour printing.
Each ribbon cartridge includes an integrated adhesive cleaning roller assembly that is
used to clean the cards entering the printer. Improper cleaning will reduce printer life
and degrade print quality.
When the ribbon is completely used, change the whole cartridge assembly.
1.
Place the printer power switch in the OFF (0) position.
Electrostatic discharge caution
:
DO NOT TOUCH the printhead or the electronic
components on the printhead.
Discharge of electrostatic charge from the
human body or other surfaces can damage
the printhead or other electronic components
2.
Open printer lid by pressing the cover
release button on the top of your printer.
3.
Peel protective wrapper from adhesive
cleaning roller by gently pulling on the tape.
4.
Insert the ribbon cartridge with the
cleaning roller facing down, so the gears on the
ends of the rollers fit into the appropriate slots.
5.
Close the printer lid and push down until you
hear an audible click.
6.
Place the printer power switch in the ON (|) position
- ribbon automatically synchronizes.
ADHESIVE CLEANING
ROLLER
RIBBON CARTRIDGE
