background image

10                                                                                                                                                                             

www.javad.com

•  < 0.5 m (real-time)

•  Cold Start /Warm Start/ Reacquisition: <35 sec-

onds/<5 seconds/ <1 second

Environmental

•  Enclosure: Molded magnesium alloy, IPX0

•  Color: Gray

•  Operating Temperature*** :

•  -40° C to +60° C (external DC power, no charging)

•  -40 ° C to +31° C (external DC power, during charging)

•  -30° C to +50° C (from internal Li-Ion battery)

•  Storage  Temperature***: -20

O

 C to +45

O

 C

•  Humidity: 100% condensing

•  Dimensions:

•   4.91 x 6.69 x 1.77inches (125 x 170 x 45 mm) with-

out radio

•  4.91 x 6.69 x 2.56 inches (125 x 170 x 65 mm) with 

radio

•  Weight: 2.2 lbs (1 kg) without radio 

2.87 lbs (1.3 kg) with radio

•  Survives a 2 m drop onto hard surface

Radio

•  4G LTE Mini Card: 

•  LTE, HSPA+, HSDPA, HSUPA, WCDMA, GSM, GPRS, 

EDGE (up to 100 Mbps); 

•  LTE, EV-DO, 1xRTT CDMA (up to 100 Mbps)

•  MicroSIM card slot: One; user accessible, fully 

sealed

•  Radio Modem:

•  Internal 406-470MHz UHF radio

•  Internal 902-928/ 868-870 MHz ISM radio (optional)

•  Base Power Output: 1 Watt

I/O

•  Communication Ports: 

•  Wi-Fi 5 GHz and 2.4GHz (802.11 a, b, g, n, d, e, i)

•  Bluetooth 4.1 Compliance and CSA2 Support

•  Dual-mode Bluetooth and Bluetooth LE

•  Full-duplex 10BASE-T/100Base-TX Ethernet port

•  High Speed USB 2.0 Host (480 Mbps)

•  High Speed USB 2.0 Device (480 Mbps)

•  Other I/O Signals:

•  External GNSS antenna

•  External cellular antenna

•  External radio antenna

•  Inclinometers and compass integrated

User Interface

•  SD card slot: High Capacity microSD Card (mi-

croSDHC) up to 128GB Class 10; user accessible,-

fully sealed

•  LED Indication: On/OFF, Battery status, External 

power, Cellular, Bluetooth, Wi-Fi, Radio, Ethernet, 

Satellites, Position, Recording statuses

•  Buttons: On/Off button; Bluetooth On/Off;  

•  Wi-Fi On/Off;  Recording On/Off

Power management

•  Battery: Rechargeable, Lightweight Li-Ion bat-

tery 42.5 Wh (nom.)

•  Operation time: 12 hours on one charge

•  External Power Input: 10-40 V DC

•  Charging: Power management notifies user 

when battery needs charging and protects battery 

from overcharging

Turning On/Off

To turn ON the receiver, press and hold the pow-

er button until the LEDs briefly flash. To turn OFF the 

receiver, press and hold the power key for more than 

one and less than four seconds (until both the SAT 

and the REC LEDs are off).

Charging and Powering

Warning: 

Risk of explosion if battery is replaced by an incor-

rect type. Dispose of used battery according to the instructions.

Warning: 

Before beginning to work, fully charge the bat-

teries for maximum operating time. An approximately 6-hour 

charge cycle will fully charge the batteries; the batteries will 

charge simultaneously. The batteries can not be overcharged.

CAUTION: 

RISK OF EXPLOSION IF BATTERY IS REPLACED BY 

AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING 

TO THE INSTRUCTIONS

Warning: 

The Li-Ion batteries used in the battery packs 

should run at no less than 80% capacity after 500 charging cy-

cles. These batteries do not need to be drained before recharg-

ing.

Warning: 

Never attempt to open the casing of the detach-

able batteries! Lithium-Ion batteries can be dangerous if mis-

handled!

Warning: 
Warning: 

Do not incinerate or heat battery pack above 212 

degrees Fahrenheit (100 degrees Celsius). Excessive heat can 

cause serious damage and possible explosion.

Warning: 

The batteries (or batteries installed) shall not be 

exposed to excessive heat such as sunshine, fire or the like.

Содержание TRIUMPH-3

























Отзывы: