9
Pairing the Radio
Step 6. Choose a Baud Rate. The baud rate setting
will be by default 115,200, but faster transfer rates
may be realized from the choices available to you
in the pull down Baud Rate menu.
Step 7. Click on Connect.
Once connected, NetView will indicate the cur-
rent status of the connection under the Last Con-
nections area.
If you expect to sometime connect your receiver
using these settings again, choose whichever slot
you like and enter a unique name for that slot for
easy recall the next time you run NetView.
From this pane, you may also Disconnect with a
click on
Dis
