11
Pairing the Radio
If your radio and receiver have been previous-
ly paired, you’ll be presented with a message to
confirm continuing with the pairing process.
Clicking Yes will not harm anything.
Step 11. Monitor the progress as the pairing pro-
cess is executed. Once the radio and receiver have
been successfully paired, look for the word
Paired
in the lower left corner.
Click Close
Step 12. The Bluetooth LED on both the
TRIUMPH‐2
and HPTxxxBT should now be blue.
Click
Connection
(on the left panel), followed by a
click on Dis to disconnect. Power off the radio and
then the receiver before exiting NetView.
Now take them outside and put them to work!
