Command Line Interface
Identification and Diagnostics Commands
29
www.javad.com
3.3. SAVE
The SAVE command is intended to store the unit’s currently used configuration into the
Configuration file. The configuration stored in the Configuration file is activated automatically after
unit’s reboot.
3.4. CFG2DFLT
The CFG2DFLT command cleans current Configuration. After BOOT command all configuration
parameters will be default.
3.5. XMOD IMAGE
The XMOD IMAGE command in Maintains Mode activates X-modem protocol to download the Modem
part of the Firmware Image.
Use this command with one delimiter: “XMOD IMAGE<CR>“ or Command “XMOD IMAGE<LF>“.
Note:
Command “XMOD IMAGE<CR><LF>“ will be accepted as command “XMOD IMAGE<CR>” and
byte of Firmware Image 0x0A.
4. Identification and Diagnostics Commands
4.1. INFO
The INFO command is used to retrieve the FH915 Radio ID along with its Hardware version, the
loaded real- time software version/revision and BootLoader’s version.
INFO [
Parameter Name
] [
/?
]
The INFO command without Parameter Name indicates all values:
FH915 Land Mobile Radio, Javad GNSS.
Product ID =41
S/N =30196
Hardware =3
Parameter Name
Short Description
ID
Product ID
SN
Serial Number (SN)
HW
3 – hardware revision
FW
2.2.30 - firmware version
BL
4.03 - BootLoader Version
Содержание HPT901BT
Страница 2: ...www javad com JAVAD GNSS Inc 2014 ...
Страница 6: ...6 www javad com ...
Страница 42: ...Safety Warnings General Warnings 42 www javad com ...