Javad HPT901BT Скачать руководство пользователя страница 41

Страница: 41 / 44

Appendix B

www.javad.com

AFETY

ARNINGS

Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Clean only with a damp cloth.

• Do not block any of the ventilation openings. Install in accordance with the manufacturer's

instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, or has been dropped.

• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, shall be

placed on the apparatus.

1. General Warnings

HPT901BT is a wireless device used in a mobile application, at least 100 cm from any body part of the
user or nearby persons.

Note:

Minimum separation distance of 100 cm between the antenna and persons must be maintained.

This product should never be used:

• Without the user thoroughly understanding operator’s manual.

• After disabling safety systems or altering the product.

• With unauthorized accessories.

• Contrary to applicable laws, rules, and regulations.

ANGER

HPT901BT

SHOULD

NEVER

USED

DANGEROUS

ENVIRONMENTS

Содержание HPT901BT












































Результаты поиска

Содержание HPT901BT

Отзывы:

Похожие инструкции для HPT901BT

Бренды по названию

Популярные бренды

Javad HPT901BT, Руководство пользователя

Результаты поиска

Содержание HPT901BT

Отзывы:

Похожие инструкции для HPT901BT

Бренды по названию

Популярные бренды