Javad HPT402 Скачать руководство пользователя

Страница: 51 / 54

Appendix C

www.javad.com

AFETY

ARNINGS

Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Clean only with a damp cloth.

• Do not block any of the ventilation openings. Install in accordance with the manufacturer's

instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, or has been dropped.

• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

shall be placed on the apparatus.

Содержание HPT402






















































Результаты поиска

Содержание HPT402

Отзывы:

Похожие инструкции для HPT402

Бренды по названию

Популярные бренды

Javad HPT402, Руководство оператора

Результаты поиска

Содержание HPT402

Отзывы:

Похожие инструкции для HPT402

Бренды по названию

Популярные бренды