Javad DELTA-3, Руководство пользователя

Страница: 8 / 22

8
www.javad.com
than the output cord when disconnecting the equipment.
Warning:
Do not operate the supply if it has received a sharp
blow, been dropped, or otherwise damaged. Do not disassemble
the supply.
Before connecting the external power source and the
receiver, make sure that the power source matches the
receiver’s voltage and current requirements.
Powering the receiver
To check the status of the internal batteries, view the
BAT LED or check the status using JAVAD GNSS soft-
ware. Check the BAT LED for battery status.
To charge the receiver internal batteries, take the fol-
lowing steps:
• Plug the Receiver-to-SAE cable’s connector into
the power port of the receiver (14-578125-01).
• Connect the opposite end of this cable with the
battery charger’-s SAE connector (22-570101-01).
• Plug the other end of this cable into an AC outlet
with cable (14-508053-01). Leave overnight.
Cables
The DELTA-3 receiver package includes standard
communication and power cables for configuring the
receiver and providing a power source to the receiver.
• Receiver-to-computer RS232 serial cable – con-
nects the receiver’s serial port and an external device
(hand-held controller or computer) p/n 14-578103-
01
• Receiver-to-SAE power cable – connects the re-
ceiver’s power port and the power supply’s SAE
connector or the extension cable’s SAE connector
p/n 14-578101-01
• SAE-to-SAE cable extension – connects SAE con-
nectors over longer distances p/n 14-578102-01
Option Authorization File (OAF)
JAVAD GNSS issues an Option Authorization File
(OAF) to enable the specific options that customers
purchase. An Option Authorization File allows custom-
ers to customize and configure the DELTA-3 receiver
according to particular needs, thus only purchasing
those options needed.
Typically, all DELTA-3 receivers ship with a tem-
porary OAF that allows the receiver to be used for a
predetermined period of time. When the receiver is
purchased, a new OAF activates desired, purchased op-
tions permanently. Receiver options remain intact when
clearing the NVRAM or resetting the receiver.
Managing and Operating
Receiver using NetView
This software is available on the JAVAD GNSS web-
site. If downloading the program(s) from the website,
extract the program’s files into a folder on your hard
drive. The following sections describe installing this
software, and other sections throughout the manual de-
scribe using this software with the receiver.
Note:
Refer to the NetView Software Manual for full details
on installing and using NetView Software.
1. If downloading the program from the website, ex-
tract the program files into a folder on your hard drive.
2. Navigate to the location of the NetView program
and double-click the Setup.exe icon.
3. Follow the on-screen installation instructions.
Click Install to continue. Keep the default installation
location or select a new location. If desired, create a
shortcut on the computer’s desktop for quick access to
NetView.
JAVAD GNSS NetView software provides an inter-
face for various configuration, monitoring, and man -
agement functions for the receiver.
Once you have established a connection between the
receiver and the computer/controller, you will be able
to configure the receiver and its components, send com -
mands to the receiver, download files from the receiv -
er’s memory; as well as, upload new firmware, upload
an OAF, and upload configuration files to a receiver,
using NetView.
Establishing an RS232 Cable Connection
Using the RS232 cable, connect the serial port of
your computer (usually COM1) to the receiver’s serial
port A.
1. Press the power buttons on the receiver and com-
puter to turn them on.
2. Start NetView, select SER as type of connection
mode, and specify the port the receiver is connected to.