Jason International, Inc. •
501.771.4477
Page 11 of 15
Customer Service : 800.255.5766
OPERATING ThE STANDARD EDITION AIRMASSEUR
®
fEATURES
The Jason Standard Edition AirMasseur
®
touchpad is used
to access all the functions of the blower control.
OPERATING INSTRUCTIONS:
AirMasseur
®
Icon
The AirMasseur
®
icon is used to activate the blower and the
20-minute timer. Pressing the icon once starts the blower in
the constant high speed mode. Pressing the icon again will
turn the blower off. (Note: The blower will always turn on in
high speed.)
Mode Icon
The Mode icon is used to move the blower from Constant
mode to the Wave or Pulse modes. Press and release the
icon once to change the blower to the Wave mode, indicated
by a slow flashing light. Pressing the icon again will change
the blower to Pulse mode. This is indicated by a rapid light
flash. Pressing the icon a third time moves the blower back
to Constant mode.
blower Speeds Icon
The Blower Speeds icon is used to increase or decrease
the blower speed once the blower is on. Press and hold the
icon to decrease the blower speed until the desired inten-
sity is reached, then release. Press and hold the icon again
to increase the blower speed until the desired intensity is
reached. The blower will return to its highest speed on any
mode change.
Option Icon
The Option icon is used to operate an optional LED light (if
installed). Press the icon for less than two (2) seconds to
turn the lights Off or On. Hold the icon for more than two (2)
seconds to change modes. This function has a two (2) hour
timer and remembers the last mode.
Figure 13
O
AirMasseur
Mode
Blower Speeds
Option