background image

Jason International, Inc.  ·  501.771.4477                              Page 12 of 12                                              Customer Service: 800.255.5766 

Copyright © 2021 Jason International, Inc. 

 

 
 

 

 
 
 

WARRANTY REGISTRATION: Register your product’s warranty online a

www.jasoninternational.com

 

 
 

 

 
 
 
 
 
 
 
 
 
 
 
 

 
 

WHIRLPOOL

  

[WP] PUMP SYSTEM

 

SYMPTOMS 

POSSIBLE CAUSES 

RECOMMENDED ACTION 

Pump operates, but no air is 

injected into the water. 

a) Air intake clogged. 

a) Refer to installer/dealer. 

Pump operates, but water is not 

being pumped. 

a) Suction or discharge blocked. 

a) Check and remove obstruction 

b) Suction air leak. (System usually 

surges) 

b) Make sure union is tight on suction 

side of the pump. 

Pump leaks. 

a) Damaged or defective seal 

a) Refer to installer/dealer. 

b) Unions cracked, under-tightened, 

over-tightened or O-Ring is not seated 

properly (possibly pinched). 

b)  Refer to installer/dealer. 

Whirlpool jet not working. 

a) Jason jets can be individually opened 

or closed. 

a) Ensure the jet is in the open 

position. 

TROUBLE SHOOTING GUIDE

 

JASON INTERNATIONAL INC. LIMITED WARRANTY 

 
The Company warrants the products of its own manufacture to be free from 
defects in workmanship and material for a period of twelve (12) months 
from date of installation or eighteen (18) months from date of manufacture, 
whichever comes first. Any merchandise which upon Company examination 
proves to be defective under normal use and service during the warranty 
period will be at the Company’s option repaired, replaced or credit issued in 
the amount of the invoice value of the defective merchandise. All other 
types of remedies are excluded. This warranty extends only to the owner of 
the originally installed merchandise. The Company is not responsible for 
labor or other installation costs for the repair or replacement of defective 
merchandise. Company reserves the right to substitute new or improved 
equipment on any replacements. The repair or replacement of equipment 
shall be F.O.B. point of shipment. 
 
This warranty shall not apply to any merchandise which has been subject to 
accident, alteration, abuse, misuse, abrasives, corrosion and/or electrolysis, 
improper voltage supply, misapplication, careless handling, improper 
installation, maintenance, abnormal chemical conditions, nor does this 
warranty cover stains, discoloration or the fading of color due to improper 
use of chemicals or improperly maintained water chemistry.  
 
This warranty shall not apply to any merchandise or parts thereof which 
were not manufactured by Company. Such product or merchandise 
manufactured by others shall have only such warranties, in writing, that may 
be extended and in force at the time by such other manufacturer or 
supplier. 
 

 

 
To obtain warranty service, you must contact the retailer from which the 
merchandise was purchased or Company’s distributor in your area. Written notice of 
warranty defects must be given to the company within thirty (30) days from the 
occurrence thereof. Written permission must be obtained by the retailer or 
distributor from the Company before any equipment claimed defective is returned 
for inspection.  
 
EXCEPT AS PROVIDED HEREIN, COMPANY MAKES NO WARRANTIES 
EITHER EXPRESSED OR IMPLIED, AS TO ANY MATTER WHATSOEVER 
INCLUDING THE CONDITION OF THE MERCHANDISE, ITS MERCHANTABILITY 
OR FITNESS FOR A PARTICULAR PURPOSE. ANY WARRANTIES IMPLIED BY 
LAW AND NOT EFFECTIVELY EXCLUDED BY THIS WARRANTY, ARE LIMITED 
TO THE DURATION AND REMEDIES OF THIS WARRANTY. IN NO EVENT 
SHALL THE COMPANY BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL 
DAMAGES. 
 
Some states do not allow limitations on how long an implied warranty lasts or the 
exclusion or limitation of incidental or consequential damages, so the above 
limitations may not apply to you.  
 
This warranty gives you specific legal rights and you may also have other rights that 
vary from state to state.

 

 

 

SAVE THESE INSTRUCTIONS 

JASON INTERNATIONAL, INC. 

8328 MacArthur Drive 

 

   

North Little Rock 

 

   

Arkansas 

 

   

72118-2029 

www.jasoninternational.com

 

Содержание Excel Series













Отзывы: