REMOTE
CONTROL
ZigBee
devices
can
be
controlled
directly
by
your
ZigBee
Controller
and
remotely
over
long
distances
with
a
PC
or
mobile
phone
app
if
your
home’s
controller
functions
as
a
gateway
connected
to
an
internet
router.
To
control
the
device
remotely
it
must
be
paired
to
the
ZigBee
Controller
as
instructed
ZigBee
Network
Pairing
Join
the
switch
to
the
ZigBee
Network
1. From
your
ZigBee
Controller’s
interface,
choose
to
add
lighting
device
and
enter
Locating/Pairing
mode
as
instructed
by
the
controller.
2. After
applying
power
to
the
In
‐
Wall
switch,
your
In
‐
Wall
Switch
will
begin
auto
scan
mode
as
it
searches
for
a
controller
to
pair
with
Auto
‐
Scan:
LED
Status
Indicator
Blinks
3x
every
10
seconds
as
the
device
scans
for
a
compatible
network
controller
to
pair
with
until
Timeout.
Timeout:
Auto
‐
Scan
mode
will
eventually
time
out
after
the
LED
Status
light
stops
blinking.
If
device
Timeout
occurs
before
the
switch
has
joined
the
ZigBee
network,
press
any
button
on
the
switch
to
resume
scanning.
3. After
the
switch
is
located
and
paired
to
the
ZigBee
network,
the
LED
Status
Indicator
will
stop
blinking
and
the
switch
will
appear
in
your
controller’s
menu.
Setup
the
switch
as
an
On/Off
control
and
title
the
switch
in
a
way
that
will
be
easy
to
identify.
The
module
is
now
paired
to
the
ZigBee
network
and
can
be
controlled
remotely.
Reset
Device
(Remove
from
ZigBee
Network)
From
the
ZigBee
Controller
From
your
controller
or
hub
interface,
choose
to
remove
or
delete
the
lighting
device
as
instructed.
The
device
will
be
removed
from
the
ZigBee
network
following
indication
from
your
controller.
All
configuration
parameters
will
be
reset
after
the
device
is
removed
from
the
network.
Manual
Resetting
to
factory
defaults
require
t
he
user
to:
1. Lift
the
air
‐
gap
switch
at
the
bottom
of
the
rocker
to
OFF
position
to
power
down
the
device.
2. Hold
down
the
UP
button
3. Push
In
the
air
‐
gap
switch
to
ON
position
to
power
up
the
device.
4. Release
UP
button
within
4
seconds
after
power
up.
