17
Step2. Interface Selection (See figure 4-2)
1. Tick “Mode” item to choose what interface
you want 1260USB to simulate either
RS232 or Keyboard.
2. Press “Setting” to select USB simulated
COM port as step 1.
3. Press”Apply” to apply setting
4. User can test the 1260USB onto the below
diagnostic box, then press “Clear” to clear
what you read in below window.
5. Press “OK” to minimize “card reader” window.
(Click the “X” button in this window on the top
of right side, if you would like to close “Card
Reader”)
Figure 4-2