22
program.
You will hear a beep and see the LED
on the reader flash while it is programming. It
will take around ten seconds and then you will
hear a long beep to indicate the ending of
programming.
Note:
Remember to check USB simulated COM
port number before you select COM port in
programming tool.
More Descriptions about the Settings
(
Refer to Figure 5-2 ~5-4
)
•
PREFIX and SUFFIX
Using PREFIX and SUFFIX allows you to
differentiate between each track; you may
input any 16 characters from ASC (001) to
ASC (255) as prefix and/or suffix.
Press “
Save this setting”
to accept your
definitions or press [EXIT] to abort.
•
FIELD SPLIT
Click
FIELD SPLIT
to enable the field split.
Once this field was enabled, the reader will
add a [CR] + [LF] at end of each field
automatically
•
START, END SENTINEL and LRC
DATA
