11
Installing Model 1210/1220K
2
This chapter describes the procedure
for installing the 1210/1220K magnetic
stripe reader. Several keyboard
wedge parametersincluding key-
board type, message suffix, inter-
character delay, and track sentinels
may be adjusted by modifying the
dip-switch settings on the underside
of the magnetic stripe reader.
If you have not already done so, turn
off your computer to avoid any
accidental damage to the card reader
and your computer.
Step 1: Turn off your computer
Step 2: Set transmission mode and keyboard type
The first three dip-switches and SW7
on Model 1210/1220K allow for the
selection of the transmission mode
and keyboard type. Locate your
keyboard model and set the dip-
switches accordingly. This card
reader offers 2 modes for data
transmission, you are recommend to
use the default SCAN MODE
setting for normal operation with full
PC/AT compatibility. For non-US
keyboard characters, please set the