14
Installing Model 1210/1220K
Unplug the PC keyboard cable from
the computer. Plug the keyboard
cable into the 5-pin female end of the
T-connector provided. Plug the male
end of the T-connector into the
keyboard port of your computer. An
installation diagram is shown below.
Step 6: Connect to computer
Step 8: Turn to Chapter 4
Step 7: Turn on computer
Turn on your computer. The com-
puter should boot up normally.
Model 1210/1220K will beep to
indicate that it is ready for operation
You are now ready to test your 1210/
1220K magnetic stripe reader. Turn to
Chapter 4.