13. Connect ground wire to ring connector and attach to center bolt that holds the side plate;
14. Slide element and side plate with connection compartment back into the main heater body;
15. Always make sure the ground wire from the supply cord is connected to the provided
space;
16. Secure the side plate with screws as well as mounting bracket bolts on side of heater;
17. Close lid on electrical connector compartment and fasten screws on either side;
18. Put back the safety grids by slightly bending and putting ends in holes of opposite side
plates;
19. You can adjust the fixing washers on the ends of the safety grid rods in or out to keep them
in correct position;
SPECIFICATIONS & WARRANTIES
All Japidi Energy Infrared Heaters are manufactured in Canada with the following specifications:
Certified to: CSA 22.2 No. 46-M1988 UPD 3, UL 2021 & UL 1278-9-06
MODEL
DELUXE 500
500W / 120V
DELUXE 1500
1500W / 120V
INDUSTRIAL
1500
1500W / 240V
INDUSTRIAL
3000
3000W / 240V
MODEL NO.
RUBY:
MODEL NO.
GOLD:
BE-IR-001-500-
120-R
BE-IR-001-500-
120-G
BE-IR-001-1500-
120-R
BE-IR-001-1500-
120-G
BE-IR-001-1500-
240-R
BE-IR-001-1500-
240-G
BE-IR-001-3000-
240-R
BE-IR-001-3000-
240-G
MATERIAL
Stainless Steel
T303
Aluminum 6063
T6
Stainless Steel
T303
Aluminum 6063
T6
Stainless Steel
T303
Aluminum 6063
T6
Stainless Steel
T303
Aluminum 6063
T6
ALUMINUM
FINISH
Anodized Bright
Silver
Anodized Bright
Silver
Anodized Bright
Silver
Anodized Bright
Silver
DIMENSIONS
INCLUDING
BRACKET
H 5.125” W 5.250”
L 22.0”
H 5.125” W 5.250”
L 22.0”
H 5.125” W 5.250”
L 22.0”
H 5.125” W 5.250”
L 37.750”
