Japan Radio Co. jlr-21, Инструкция по эксплуатации

Страница: 67 / 148

5-5
5.2.1.2 Startup (Error-1)
If any of the self-diagnosis results are "NG", the results are displayed.
The unit does not switch to the standard screen unless the key is pressed.
If any errors (NG) are detected, perform a DIAGNOSIS (self-diagnosis) from the 5.4
Maintenance Menu, and check the details of the failed item. (Refer to "5.4.3 Self-Diagnosis
(DIAGNOSIS)").
5.2.1.3 Startup (Error-2)
Messages shown below may be displayed during sensor diagnostics.
The message appears when display unit and sensor configuration settings do not match, when
equipment has been replaced.
When this occurs, select one of the items, and press the key to perform it.
[ 1. USE SENSOR CONFIG ]: Replaces display configuration with the sensor configuration.
[ 2. USE DISPLAY CONFIG ]: Replaces the sensor configuration with the display configuration.
Consult with JRC or its affiliate if this is displayed frequently.
Attention
Attention
OK
OK
OK
OK
OK
OK
OK
OK
NG