Japan Radio Co. jlr-21, Инструкция по эксплуатации

Страница: 107 / 148

5-45
5.4.8 CCRP Settings
Selecting CCRP in “5.4 Maintenance Main Menu” displays a CCRP setting screen.
CCRP stands for Consistent Common Reference Point, and is a reference point for defining the
positional relationship of equipment installed outdoors using a common coordinate system.
(Only CCRP settings are allowed in this device, and a measurement conversion process to
CCRP is not available.)
[CCRP Settings]
・
“Ship Information”, “Sensor Unit Installation Position”, and “CCRP Information” are set.
・ “Sensor Unit Installation Position” and “CCRP Information” are set in the coordinate system
having the center of stern as the origin (The unit of measure is m.)
・
CCRP settings are not allowed when the display is set to the Sub Display setting (secondary
display setting); set CCRP in the main display unit (primary display unit.)
●
is displayed at
the position input in
“CCRP”.
The number set for
“SENSOR” is
displayed.
Input ship information.
Width: Ship beam
Length: Ship length
Input the
installation position
of a sensor unit.
Any number from 1
to 9 can be
Input CCRP
information (the
reference point).
+18.0m
+7m
Select from Valid
or Invalid.
Example for setting
SENSOR（No.1 setted）
Point X: +2m
Point Y: 10m
CCRP
Point X: +0m
Point Y: 10m
origin
coordinate
SHIP
BEAM : +7m
LENGTH : +18.0m