Janz Tec emPC-CX+, Справочное руководство системы

Страница: 9 / 44

emPC-CX+ ( System Reference Manual)

Introduction 1 - 7
Rev. 1.2
© Janz Tec AG
1 Introduction
The CX series are flexible embedded computing systems based on high performance processor
technologies. Due to permanent minimization of all machines the CX series are a small but flexible
and high performance computing system which matches all needs of different customized solutions.
Additionally the emPC-CX+ systems are able to be mounted on the rear side of a LCD display to
become a flexible HMI system with or without touch screen called emVIEW. Look for these emVIEW
systems for more information at the Janz homepage. The emPC-CX+ series is available all common
operating system.
1.1 Features

small housing size

Typ 6 COM Express powered

Up to 4x USB 3.0 (2 additional internal USB 2.0)

1x DVI-I

2x 10/100/1000 Mbits Ethernet

CFAST slot

(9)14 .. 34 V DC power supply

fanless cooling concept with low power CPUs

PCIe based expansion options

Riser card connector with 2x X1 and 2x X4 link width

PCIe mini card connector

2x X1 link on personality module

PCIe attached FPGA subsystem with flexible IO personality module

Up to 2x isolated CAN ports with SJA1000 controller and LED status indicators

RS232/RS485 interfaces (non-legacy)

Digital IO

status LEDs for power-on and HDD activity

internal LVDS port for use in combination with emVIEW displays

internal serial port for the touch screen (emVIEW display only)

internal 2x
SATA connector for SATA 2,5’’ HDD