S P E C I F I C A T I O N S A N D F E A T U R E S
40
o
Sealed --fast woofer transient response, low group delay, tight
integration with electrostatics
o
Walls high mass, 1” thick [25 mm], well damped, well braced;
negligible vibration
o
2.5” [63 mm] thick, solid hardwood baffle is stable and rigid, yet free
of resonances
o
Baffle step is reduced by front edge scoops, which are also visually
interesting
o
Modest backward tilt
Maintains time alignment between drivers and thus sharpens
image
Causes the image to appear above the speakers, not from down
on the floor
•
Plinth
o
2.5” [63 mm] thick
o
Solid, hard maple, painted to match cabinet
o
Choice of high durometer rubber feet or spikes
•
Amplifiers
o
Two amplifiers in each cabinet, one for the woofers and one for the
electrostatics and airLayers
o
Input impedance (analog)
XLR: 44 kΩ, balanced to ground
RCA: 54 kΩ
o
S/N ratio
111 dBA Digital input
109 dB Analog input
o
Power (each speaker) 1000W RMS maximum
o
Damping factor: >1500
o
Distortion: < 0.001% (THD + Noise)
o
Frequency response: 10 Hz – 50 kHz, +0/-3 dB
o
Efficiency: 92% at full power – very green
o
Mains power: 17 Watts idle; 220 Watts max.
o
Self-adapts to any mains worldwide
o
IEC cord inlet with power switch and fuse drawer -- uses standard
power cords worldwide
o
Fuse: Slow blow; 12A for 120V or 6A for 240V
o
Built-in surge protection
•
Weight
-- 28 kg [62 lbs] each with standard plinth
