U N P A C K I N G
7
7)
Lift the blue foam insert away from the speaker.
8)
Grasp the top end of the speaker, pressing the remaining blue foam insert
against the speaker so that the two do not separate.
9)
Gently tilt the speaker up onto its top until it is vertical, then further until the
free feet touch the floor.
10)
While continuing to support the speaker, remove the remaining blue foam
insert, and let the speaker down onto all its feet.
11)
Tilt the speaker forward and clip the tie that holds the bag shut, then slip the
bag up and off.
12)
Remove the protective film from the cabinet.
13)
We advise that you retain all packing materials in case you want to sell or
return the speakers. The cartons can be folded flat, and the inserts can be
interleaved to occupy less space.
When re-packing, it is critical to wrap the speaker
in stretch film before replacing the bag, or the paint will be damaged by rubbing against the
bag in transit.
Feet
If the speakers were fitted with rubber feet, and you wish to switch over to carpet
spikes:
1)
Lay the speaker onto its face on a carpeted or other soft surface.
2)
Using a #3 Philips screwdriver, remove the screws holding the feet in place.
3)
Locate the studs in the package of spikes.
4)
Screw the studs into the inserts in the speaker base. The studs have a slot at
one end to facilitate this.
5)
Screw the spikes onto the studs.
6)
If the spikes have been ordered for use on carpeting, as we would advise for
making firm contact with the floor, ensure that the adjustable tips are
screwed in tightly.
7)
If the spikes are for use on hard floors, coin-like metal pads are included to
avoid damage to the floor, and the adjustable tips can be used to
accommodate uneven surfaces.
Grills
The speakers are designed to offer optimal sound reproduction with the grills in
place, and they also help protect the electrostatic elements, both from mechanical
damage and from collecting particulates from the air.
The grills are permanently installed. Removal or attempted removal will cause
irreparable damage.
