Vertical
Roof Venting
Roof cap
Option 2:
Side wall cap
Horizontal
Wall Venting
Option 1:
1. Place the range hood on a flat, stable surface. Connect the power cord of the range hood
to a designated standard outlet, 110
̃
120V/60Hz, AC only and turn the range hood ON. Verify
all operations of the range hood by referring to
Operating The Range Hood
section of this
manual, then turn the Range Hood OFF and unplug from the power outlet.
2. Place all supplied parts and required hardware on a flat, stable surface and verify the exis-
tence of all supplied parts listed on Page 4.
3. Carefully remove the white plastic protective coat from the exhaust duct covers and range
hood.
4. Remove the filters to reduce the weight for installation. Position one hand beneath a filter
and use the other hand to release the latch to enable filter removal.
5. Determine and mark the center line on the ceiling where the range hood will be installed.
Make sure there is proper clearance within the ceiling or wall for exhaust vent.
ADVANCED PREPARATION:
8
