IMPORTANT:
Clean the hood and panel filters frequently according to the following instructions.
Exterior Surfaces:
To avoid damage to the exterior surface, do not use steel wool or soap-filled scouring pads.
Always wipe dry to avoid water marks.
Cleaning Method:
• Liquid detergent soap and water, or all-purpose cleaner.
• Wipe with a soft damp cloth or non-abrasive sponge, rinse with clean water, and wipe dry.
• For discolorations or deposits that persist, use a non-scratching household cleanser or stainless
steel polishing powder with a little water and a soft cloth.
• Do not allow deposits to remain for long periods of time.
Stainless Steel Baffle Filters:
- Filters should be cleaned frequently (every two months of operation, or more frequently for heavy
use).
1. Pull the latch release handle and remove each filter by pulling it down.
2. Wash the filters in the dishwasher, or soak in hot or warm water with dish detergent for half an
hour, then wipe the filters clean. Repeat these steps until no oil residue remains.
3. Let the filters dry thoroughly.
4. Reinstall the filters one by one, making sure that latch release handles are located towards the
front of the range hood.
CLEANING & MAINTENANCE:
RANGE HOOD CARE
WARNING: To reduce the risk of electrical shock, DO NOT clean the hood while it's operating.
WARNING: Never put your hands into the area housing the fan when the fan is operating.
Replacing the LED Light Bulbs:
CAUTION!
Disconnect from the power source before servicing.
ATTENTION:
Wear gloves to protect against sharp edges.
NOTE: This range hood uses 120V LED. (Model No.: GU10.)
1. Unplug the range hood, or turn off the breaker.
2. Press on the rim of the Light Bulb and twist counterclockwise
to detach.
3. Pull out the Bulb. Use a flathead screwdriver if needed.
4. Align and place the new Bulb back into position.
5. Press on the rim of the new Bulb and twist clockwise to
lock into position.
6. Plug in the range hood, or turn on the breaker.
12
