- To Turn the Fan ON
press the Power Button and select the Exhaust Fan Speed:
• Press Once - Low (Digital Display shows F1)
• Press Twice - Medium (Digital Display shows F2)
• Press Three Times - High (Digital Display shows F3)
• Press Four Times - Turns Off the fan
- To Delay Power OFF Function
- press the Power Button once while the fan is in working mode.
The digital display will read 3:00 minutes and the fan will
Turn Off
after three minutes.
- To Turn the Light ON/OFF
press the Light On/Off button once.
Note: The fan and lights operate independently of each other.
- To Set the Time
, press the Power button to turn On, and then press the Power Button again and
hold it for 3 seconds.
The Light and Fan light will illuminate and blink. The adjustment ranges between 00:00 and
23:59.
The Hour part will blink (
00
:00)
Adjust the Hour by pressing the
Fan Button for + hrs
, or the
Light Button for - hrs.
Once
the Hour is correct, press the
Power On/Off
button to
save and switch
to the Minutes.
Set the minutes the same way (using the Fan and Light buttons for + and - respectively).
Press the
Power On/Off
button to
save
time setting.
- Remote Control Sensor:
The remote control sensor receives an infrared (IR) signal from the remote control. The maximum
distance for IR data transmission is 15 feet and requires a direct line of sight. The transmission
distance may vary depending on temperature and the remote control battery condition.
Light settings are independent from other settings (including Power Off Delay) and lights have to
be manually turned On/Off.
Note: The Remote Control is powered by CR2025 battery.
00:00
RANGE HOOD USE
Remote
Control Sensor
Lights
On/Off
Digital
Display
Power
On/Off
Exhaust
Fan Speed
RANGE HOOD CONTROLS:
OPERATING THE RANGE HOOD:
11
