Janser MASTER MOBIL II, Инструкция пользователя

Страница: 16 / 25

16
USER INSTRUCTIONS MASTER MOBIL II (111 801 000) 2018-01
3 TRANSPORT
3.1
Raising
3.2
Loading/
unloading
3.3
Storage
Always remove all counterweights and blades
before loading or unloading.
Easy to lift if you can not drive the machine
or have no ramp available.
ATTENTION! machine weight
Carrying or lifting the machine always
with 2 people
Remove the weights -> see 4.3
Adjustment of the carrying position-> see 4.2
With the help of a ramp, the machine can be
transported over different levels
Make sure the ramp is clean and dry, free of
grease or oil.
1. Attach ramp securely to back of vehicle,
making sure there is good contact.
2. Position machine at back of ramp,
respectively at head of ramp.
3. Engage power switch and drive onto vehicle,
respectively drive out of vehicle.
Lowering handle may be necessary for proper
clearance into the back of smaller cars.
ATTENTION!
Make sure ramp is secure before using.
Failure to do so could cause ramp to fall away
from truck, causing damage to the machine
and/or injury to the operator.
For space-saving transport, the ramp
can be folded in half.
The machine can be stored in a space-saving manner
when out of service or for transport in vehicles
Handle angle set in the storage position
(Handle angle adjustment, see chapter 4.2)
ATTENTION ! Do not lift the machine by the handle
Improper transport can cause damage to the machine
and danger of falling. (Proper transport see above)