1
Magazine carri-
2 Telescopic element
3 Power unit
er
d
Push-button
g
Screwdriver blade
a
Setting gauge
e
Setting screw
h
On/off switch
b
Locki ng button
f
Depth stop
Locking button for continuous use
C
Coupling
1. 1
Preparation for use and operation of the equipment
1. Rotate the magazine carrier through 180
°
2. Push up the locking button (b) completely and engage
it in position (Photo).
3. Push the magazine carrier inwards and upwards and
disengage the locking button. The shaft of the locking
button pushes on to the magazine.
4. Set the depth stop (see Bullet 1.2).
5. Adjust the setting screw (see Bullet 1.3).
6. Using the on/off switch (h) and start the equipment
using the locking button for continuous use (i).
10 rivets at a time can be dispensed using the magazine.
7. To reload the equipment repeat steps 2 and 3
3
