Janome Skyline 55 Скачать руководство пользователя страница 37

Страница: 37 / 92

Close the zipper and spread the fabric open at with

the right side facing up.

Attach the Zigzag foot A.
Adjust the stitch length to 5.0, stitch width to 4.5 (default

value) and thread tension dial to 1.

Baste the opened fabric and zipper tape together.

Basting

Zipper tape

Attach the zipper foot E.

Adjust the stitch length to default value, stitch width to

0.5–1.5, thread tension dial to “AUTO”.

     Backstitch across the end of the opening 0.7-1 cm
    (3/8) and turn the fabric 90 degrees.

0.7-1 cm (3/8)

Stitch through the garment and zipper tape, guiding

the zipper teeth along the side edge of the foot.

    Stop about 5 cm (2) from the top of the zipper.
    Unfasten the basting stitches.
    Lower the needle into the fabric, raise the foot, and

open the zipper.

5 cm (2)

Basting stitches

Lower the foot and stitch the remainder of the seam,

making sure the fold is even.

Remove the basting threads after seaming.

b n

CAUTION:

Be sure that the needle does not strike the presser
foot or zipper teeth

when the zipper foot is attached

and stitch width is adjusted.

Содержание Skyline 55





























































































Результаты поиска

Содержание Skyline 55

Отзывы:

Похожие инструкции для Skyline 55

Бренды по названию

Популярные бренды

Janome Skyline 55, Инструкция

Результаты поиска

Содержание Skyline 55

Отзывы:

Похожие инструкции для Skyline 55

Бренды по названию

Популярные бренды