Janome Skyline 55, Инструкция

Страница: 20 / 92

18
z
i
e
x
w
r
t
u
y
o
c
Put the bobbin on the bobbin winder spindle.
r
Bobbin
t
Bobbin winder spindle
v
Pass the thread to the bobbin.
Hold the thread with both hands and wind it around
the bobbin clockwise several times.
b
Insert the thread into one of the slits
u
of the ange
plate
y
and pull the thread to cut.
y
Flange plate
u
Slit
n
Push the bobbin to the right. The bobbin mark
appears on the LCD screen.
i
Bobbin mark
m
Start the machine.
Stop the machine when the bobbin is fully wound and
stops spinning.
Return the bobbin winder spindle to its original
position.
,
Remove the bobbin. Cut the thread with bobbin thread
cutter B
o
.
o
Bobbin thread cutter B
NOTE:
For safety purposes, the machine will automatically
stop 1.5 minutes after starting bobbin winding.
Winding the bobbin
z
Pull the thread from the spool.
Hold the thread with both hands and pass the thread
into the guide slot
q
.
q
Guide slot
x
Draw the thread to the left and forward around the
thread guide
w
.
Draw the thread to the rear and to the right around
and under the guide plate
e
.
Firmly pull the thread to the right while holding it with
both hands.
w
Thread guide
e
Guide plate
NOTE:
Set the speed control slider at the fastest position (refer
to page 8).
c v
b n
m ,
q
e