Janome Harmony 8100, Инструкция

Страница: 36 / 63

34
w
Shell Stitch
q
F: Satin stitch foot
* Use a lightweight fabric such as tricot.
Fold and stitch on the bias.
Set the stitch width and length as you desire.
You may need to tighten the top thread slightly.
Allow the needle to just clear the folded edge of the
fabric when it zigzags.
If you sew rows of shell stitches, space the rows 1.5 cm
(5/8
" ) apart.
You can sew shell stitches on knits or soft silky wovens
in any direction.
Appliqué
q F: Satin stitch foot
Stitch patterns 24, 25 and 26 can be used for appliqué.
In this type of appliqué raw edges are folded under.
To finish the raw edge, first cut the appliqué design
out of cardboard.
Fuse a lightweight interfacing to the wrong side of the
fabric, then cut the fabric slightly larger than the
cardboard.
Fold the fabric around the cardboard and press to
form a perfectly shaped design.
Tape the appliqué in place and sew, guiding the slit on
Foot F next to the finished edge of the appliqué.
w
Pressure dial
e Slit
e
q
q
Eyelets
The pattern can be used to sew a small eyelet for
belts passing cord, etc.
Remove the fabric and cut the small eye with the seam
ripper, pointed scissors or awl.
q
F: Satin stitch foot
w
Eyelets
1
3
2
q
w