background image

AAASewing.com

36

Scallop Hems

Stitch selector:

11

Stitch width:

3Ð6.5

Stitch length:

0.5Ð1

Top thread tension:

1Ð4

Presser foot:

F: Satin stitch foot

Some of the craft patterns can be used to
attractively finish the edges of collars, pockets and
placements.
To edge a collar, place interfacing between upper and
under collar and sew the pattern on the seam line.
After sewing, trim fabric close to stitching taking care
not to cut thread.

1cm (3/8ý)

Elastic Stitch

Stitch selector:

19

Stitch width:

5Ð6.5

Top thread tension:

3Ð6

Presser foot:

A: Zigzag foot

Stitch selector:

9

Stitch width:

5Ð6.5

Stitch length:

0.5Ð1.5

Top thread tension:

3Ð6

Presser foot:

A: Zigzag foot

Choose this stitch to attach elastic to garments.

Mark the elastic into quarters and match these to the
center front, center back and side seams.

Place the middle of the elastic under the center of the
presser foot and stitch into place, making sure the
elastic is evenly distributed.

1

2

3

4

0

0

1

3

2

4

5

6

0

1

3

2

4

5

6

1

2

3

4

0

0

1

3

2

4

5

6

4

3

5

4

3

5

2

1

3

Janome 5024 Instruction Manual 

www.aaasewing.com 

5024 Owners Manual/ User Guide

Содержание Decor Excel II 5024










































Отзывы: