JanomeFlyer.com
46
5
1
2
3
4
q
w
r
e
e
r
q
w
e
A
B
CARE OF YOUR MACHINE
Cleaning the Feed Dogs and Looper Area
WARNING:
Turn the power switch off and unplug the machine
before cleaning.
NOTE:
Do not dismantle the machine in any way other than
what is explained in this section.
z
Remove the presser foot and needles.
x
Remove the setscrew and needle plate.
c
Clean the feed dogs with a lint brush.
q
Setscrew
w
Needle plate
e
Lint brush
v
Open the looper cover and clean the looper and
surrounding area with the lint brush.
b
Replace the needle plate, needles and presser foot.
Close the looper cover.
r
Looper cover
Replacing the Light Bulb
WARNING:
Turn the power off before replacing the light bulb.
The bulb could be HOT, wait until it has cooled down
before touching it.
z
Remove the setscrew and face plate.
x
Push up and twist the bulb counterclockwise (in the
direction “A”) to remove it.
Push up and twist the bulb clockwise (in the
direction “B”) to replace it.
c
Attach the face plate with the setscrew.
q
Setscrew
w
Face plate
e
Light bulb
Janome CoverPro 1000CPX Instruction Manual
www.janomeflyer.com
1000CPX Owners Manual/ User Guide
