Janome 1110DX - Скачать руководство пользователя страница 13

Страница: 13 / 99

Connecting the Machine to the Power Supply

Before connecting the machine to the power supply,
make sure the voltage and frequency shown on the
machine conform to your electrical power.

1. Turn off the power switch, and connect the

machine plug to the machine socket.

2. Connect the power supply plug to your power

supply.

3. Turn on the power switch.

Controlling Sewing Speed

Sewing speed can be varied by the foot control.

The harder you press on the controller, the faster the
machine runs.

Step on the foot control with the presser foot lifter up, and
practice controlling the speed.

For Your Safety:

* While in operation, always keep your eye on the

sewing area, and do not touch any moving parts
such as the thread take-up lever, loopers,
handwheel, needle or knives.

* Always disconnect the machine from the power

supply:

— when leaving the machine unattended.
— when attaching or removing parts.
— when threading or cleaning the machine.

* Do not place anything on the foot control, otherwise

the machine will start inadvertently.

1 Power switch

2 Machine plug

3 Machine socket

4 Power supply plug

5 Power supply

6 Foot control

1 Foot control

Содержание 1110DX -




































































































Результаты поиска

Содержание 1110DX -

Отзывы:

Похожие инструкции для 1110DX -

Бренды по названию

Популярные бренды

Janome 1110DX -, Инструкция

Результаты поиска

Содержание 1110DX -

Отзывы:

Похожие инструкции для 1110DX -

Бренды по названию

Популярные бренды