Page 27
= Peak value
= Minimum value
= Supply
User password
With a three digit user password you can protect the device from
unintentional changing of the programming. In delivery condition,
the user password is "000".
If a changed user password is not known anymore, the user password
can only be reset by the master password „758“.
User password
PRG
L1
L2
L3
Software Release
The software for the UMG 96 is improved and expanded continously.
The software release is marked with a number. The software release
cannot be changed by the user.
Example: Software Rel. 1.23
LCD contrast
The favoured view for the LCD display is from below. This favoured
view can be adapted by the user. The contrast setting is possible in
steps from 0 to 15.
0 = Very light
15 = Very dark
In order to achieve an optimum contrast over the whole temperature
range, the inner temperature of the device is measured and the
contrast setting is corrected automatically. This correction is not in-
dicated in the display
contrast setting
.
Programming of LCD contrast
In programming mode go to LCD contrast by pressing key 2. Con-
firm with key 1.
The first cipher of the contrast setting is flashing. Go to the right
cipher with key 1.
Now you can change the cipher with key 2. You can move to pro-
gramming menue
„user password“
by pressing key 2 afterwards.
PRG
L1
L2
L3
PRG
L1
L2
L3
PRG
L1
L2
L3
