janitza AHF-PRO-Panel, Руководство пользователя и технические данные

Страница: 11 / 16

www.janitza.de
11
7” Touch Display
4. Mounting
4.1 Installation location
DANGER
Danger of electric shock!
Electric shocks lead to serious injuries, including
death.
·Disconnect your system from the power supply
before mounting and connecting the device!
·Secure it against being switched on!
·Check to be sure it is de-energized!
·Ground and short circuit!
·Cover or block off adjacent live parts!
·The installation must only be carried out by
qualified personnel with electrical training!
The display is suitable for installation in station-
ary and weather-protected indoor switchboards.
Ground conductive switchboards!
4.2 Securing
Install the monitor system using the following
steps:
·Remove the product from the outer packaging
·Separate the monitor unit from the door plate by
loosening the 4 screws
·Separate the faceplate from the door plate by
loosening the 4 screws.
·Make the required holes and cuts on the switch-
board cabinet door (see next chapter).
·Place the faceplate on the front of the door. When
doing so, guide the 4 screws through the holes.
·Place the door plate on the back of the door.
Screw the door plate together with the screws of
the faceplate.
·Attach the monitor unit to the back of the door. To
do so, tighten the nuts on the clinch bolts.
Item Designation Quantity
1 Faceplate
1
2
Door plate
1
3 Monitor unit 1
4 M4 washer 8
5 M4 spring washer 8
6 Hex nut
8