janitza AHF-PRO-Panel Скачать руководство пользователя страница 6

7” Touch Display 

www.janitza.de

6

2.  Safety

The chapter on Safety contains information which 
must be observed to ensure your personal safety 
and avoid material damage.

2.1 

Display of warning notices and safety 
information

The warning notices shown below

 ·can be found in all documents concerning the 

use of your devices, modules and components.

 ·can be found on the devices, modules and com-

ponents themselves.

 ·indicate potential risks and hazards.
 ·underscore aspects of the information provided 

that clarifies or simplifies procedures.

The additional symbol on the devices, modules 
and components themselves indicates an elec-
trical hazard that could result in serious injury or 
death. 

This general warning symbol draws attention to a 
possible risk of injury. Be certain to observe all of 
the information listed under this symbol in order to 
avoid possible injury or even death.

2.2 

Hazard levels

Warning and safety information is marked by a 
warning symbol, and the hazard levels are shown 
as follows, depending on the degree of hazard:

DANGER

Warns of an imminent danger which, if not avoided, 

results in serious or fatal injury.

  WARNING

Warns of a potentially hazardous situation which, if 

not avoided, could result in serious injury or death.

  CAUTION

Warns of an immediately hazardous situation 

which, if not avoided, can result in minor or moder-

ate injury.

ATTENTION

Warns of an immediately hazardous situation which, 

if not avoided, can result in material or environmen-

tal damage.

INFORMATION

Indicates procedures in which there is 

no 

hazard of 

personal injury or material damage.

Содержание AHF-PRO-Panel

















Отзывы: