Janitza AHF
61
Menu
Description
System
parameters
L1 phase angle
2)
Internal calibration function – not configurable
L2 phase angle
2)
Internal calibration function – not configurable
L3 phase angle
2)
Internal calibration function – not configurable
Setup comp., har-
monic odd
Harmonic compensation in the range of the 1st to 49th har-
monic and their compensation rate
Setup comp., har-
monic even
Harmonic compensation in the range between the 2nd and
50th harmonic and their compensation rate
Energy saving version
Switch the device off regularly to save energy
Selection of days of
week
Set the weekly operating times of the AHF
Selection of holidays
Set the idle times for the AHF
Display
settings
Local address
Address of each module in the system
Baud rate
9600 bps or 19200 bps
Language
Set the language
Network
Set the IP address, subnet mask, gateway and MAC address
Time
Set the time
Acknowl-
edge
Acknowledge alarm messages
Close
Exit the “Settings” menu
Alarm
Active alarm
Serial no., name and start time of the active alarm
Historical alarm
Serial no., name and time for the start/end of the alarm
Historical
alarm download
Download the history of the alarm messages to a
USB storage medium
Save setup Message list of the actions
2)
The parameters marked in gray are factory set and can only be
changed in consultation with a Janitza service technician
