Page 27
Jandy
®
Commercial Salt Chlorinator | Installation & Operation Manual
ENGLISH
FLOW SWITCH ENABLED
LEDS FLOW ON
FLOW SWITCH ALARM
LEDS FLOW & STOP BLINKING
5.4 Alarms
5.4.1 High Salt Level
If too much salt has been added, the power supply
will automatically reduce the production level to
the selected level. The “SALT” indicator will remain
illuminated.
5.4.2 Low Salt Level
In case the salt level in the water is below the
recommended value (5gr/L) the power supply will not
be able to reach the selected production level. The
“SALT” indicator will flash.
5.4.3 Flow Gas / Flow Switch
The power supply includes a safety system that acts
in the absence of flow in the cell, the power supply
will stop production in the event of insufficient flow
and will reset when the flow is restored.
STOP CL EXT
SET & PROD 0%
LED STOP & CL EXT blinking
FLOW CELL ENABLED
LEDS FLOW & CELL ON
FLOW CELL ALARM
LEDS FLOW & CELL & STOP BLINKING