Page 8
5. Coil the 4-foot length of cord around the
fi
xture and place the light assembly into the niche.
6. Engage the retainer tab on the bottom of the face ring, then pivot the top of the
fi
xture inward and
tighten the special pilot screw.
WARNING
Use only the special pilot screw provided with this underwater light. This screw mounts and
electrically grounds the housing securely to the mounting ring and wet niche. Failure to use the screw
provided could create an electrical hazard, which could result in death or serious injury to pool or spa
users, installers or others due to electrical shock.
7. Fill the pool or spa until the underwater light is completely submerged in water before operating the
light for more than 10 seconds. Turn on main switch or circuit breaker, and the switch, which operates
the underwater light, to check for proper operation. Refer to
Section 6, Operating Instructions
.
Содержание JandyColors JPL1230
Страница 2: ......
