Jandy AquaLink AQWHR18, Инструкция по установке и эксплуатации

Страница: 9 / 48

Page 9
Jandy ® AquaLink ® Wireless Handheld Remote | Installation & Operation Manual
ENGLISH
3.1 Transceiver J-Box Connection to Power Center PCB
6' Min.
6"
¼ "
A
8' Min.
4 Green 3 Y
ellow
2 Black 1 Red
Transceiver
J-Box
Blower or Other
Equipment
Detail A
To Ground
Level
Low Voltage
Cable
High Voltage Raceway
Bottom View
Low
Voltage
Raceway
Low Voltage Knockouts
with Heyco Fittings
High Voltage
Knockouts for Conduit
1. Turn off all power to the power center.
2. Mount the transceiver J-Box at least 6' above the ground and 8'
from air blowers that may be nearby.
3. The transceiver J-Box antenna must point towards the sky.
4. Route the four conductor wire from J-Box through the Heyco
®
fi tting into the power center low voltage raceway.
5. Open the door to the power center and remove the dead panel.
6. Feed the four conductor wire into the power center through the
low volt age raceway.
7. Trim excess wire.