Jandy AquaLink AQWHR18, Инструкция по установке и эксплуатации

Страница: 12 / 48

Page 12
ENGLISH
Jandy ® AquaLink ® Wireless Handheld Remote | Installation & Operation Manual
2. Use the UP and DOWN buttons to highlight the desired RF
channel. Then press SELECT.
3. When the RF channel is selected, the following message appears
on the remote display screen:
Set slide switch on J-Box PCB to the LEARN MODE.
MAIN CONNECTOR
RESET
D2
D3
LEARN
Y B R G
OFF
ON
LEARN
OFF
ON
Transceiver J-Box - Internal View
Green LED
(Receive)
Red LED
(Send)
PCB
Reset
Button
4. At the Transceiver J-Box, remove the cover to expose the PCB.
5. Slide the learn switch to ON.
6. On the handheld remote display screen, a prompt will read:
Restore J-Box Slide Switch and Press J-Box Reset Button.
7. Slide the learn switch inside the transceiver J-Box to OFF.
8. Press the reset button inside the transceiver J-Box.
9. When complete the red and green LEDs on the J-Box will blink
simultaneously.