Jands HP6, Техническое руководство

Страница: 44 / 96

RUN:
SNAP 1~3, SCENE 1&2, PRE-RECORDED CHASES 1~6
[1]
DISPLA
Y =
"SP1 on level 100" "SP2 on level 100" "SP3 on level 100"
[2] [3]
DISPLA
Y = "SC1 on level 100"
"SC2 on level 100"
DISPLA
Y = "PR1 run 100 B.P
.M."
"PR2 run 100 B.P
.M."
"PR3 run 100 B.P
.M."
"PR4 run 100 B.P
.M."
"PR5 run 100 B.P
.M."
"PR6 run 100 B.P
.M."
[4]
Press SELECT and hold while adjusting channel level via level control. This step removes the selected channel from a SNAP
, SCENE or
PRE-RECORDED CHASE and enables the channel level to be adjusted in isolation. These new levels are not stored. Status LED red = 110V Status LED green = 240V
HP
DIMMER MS-9507-04
ENTER
NORMAL
[Stand alone channel level]
[over all Level of SNAP]
[SP1: SNAP1 / SP2: SNAP2 / SP3: SNAP 3]
RUN
RUN
SELECT
ST
A
TUS
SELECT
ST
A
TUS
ENTER
[Stand alone channel level]
[over all Level of SCENE]
SELECT
ST
A
TUS
SELECT
ST
A
TUS
ENTER
[Stand alone channel level]
[Speed in B.P
.M.]
SELECT
ST
A
TUS
SELECT
ST
A
TUS
NORMAL
NORMAL
[SC1: SCENE1 / SC2: SCENE2]
[Exit to DMX operation]
[Exit to DMX operation]
[Exit to DMX operation]
[1]
[2]
[3]
[4]
[4]
[4]
[PR1 -PR6: Prerecorded chases]
[ST
AR
T]
[Speed]
Figure 4.4