Jands HP6, Техническое руководство

Страница: 40 / 96

[1]
Repeat for each channel to be tested. All remaining channels will operate as normal.
[2]
Will display bank number in blocks of 12 channels (6 channels for HP6) After a deep clear
, it is necessar
y to
reprogram the dimmer to indicate output voltage 110V or 240V
and
number of channels (12 for HP12). Status LED red = 110V Status LED green = 240V
[3]
For DEEP CLEAR. T
urn off power
.
Hold MODE and DMX BANK simul- taneously while turning on power
.
HP
DIMMER MS-9507-02
TEST
NORMAL
[Exit to DMX operation]
TEST
LEVEL
SELECT
ST
A
TUS
DMX BANK
ENTER
[DMX BANK selected ]
DMX BANK
FUNCTION
[Selected DMX BANK value]
DMX CH.
ENTER
[DMX start number selected ]
DMX CHANNEL
[Selected DMX start channel]
FUNCTION
[1]
[2]
[DMX start level ]
[DMX BANK No. ]
DMX BANK
MODE
FUNCTION
ENTER
FUNCTION
ENTER
[Selected output voltage]
[Number of channels for dimmer]
[Exit to DMX operation ]
DEEP CLEAR
[3]
POWER
[ST
AR
T]
[ST
AR
T]
[DMX BANK value]
[DMX start channel]
[ST
AR
T]
[ST
AR
T]
[Selected output voltage]
[Number of channels for dimmer]
TEST
, DMX BANK, DMX CHANNEL, DEEP CLEAR
Figure 4.2